Table of Contents
Advertisement
4
In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font.
d
Reference
For details, refer to the User's Guide DVD.
4.1.2
Association with application
To use the My Panel or My Address function, you need to purchase My Panel Manager and enable the target
function in the application side.
For details on how to enable such a function, refer to the My Panel Manager User's Guide.
Tips
-
The optional Extension Memory is required to use the My Address function.
-
The Hard Disk is optional in some areas. When installing the optional Extension Memory, the option-
al Hard Disk must also be installed in this machine.
4.1.3
Registering the i-Option license
To add an optional function to this machine, you need to purchase i-Option and register its license.
Tips
-
Check that this machine can be connected to the Internet.
-
The optional Extension Memory is required to use i-Option LK-102 v3/LK-105 v4/LK-106/
LK-107/LK-108/LK-110 v2/LK-114.
-
i-Option LK-110 v2 includes the function licenses for i-Option LK-102 v3 and i-Option LK-105 v4. If
you purchase i-Option LK-110 v2, you do not need to purchase i-Option LK-102 v3 or i-Option
LK-105 v4.
-
The Hard Disk is optional in some areas. When installing the optional Extension Memory, the option-
al Hard Disk must also be installed in this machine.
For details on how to purchase or install an optional unit, contact your service representative.
Preparation flow
The following describes a preparation flow to use advanced functions. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Enabling the i-Option function (Administrator)
% Enable the i-Option function on this machine. For details, refer to page 4-5.
% If you cannot enable the function above, proceed to steps 2 and 3.
2
Registering the i-Option license (Administrator)
% Register the license on a dedicated Web site. For details, refer to page 4-6.
3
Enabling the i-Option function using the license (Administrator)
% Enter the license code to enable the function. For details, refer to page 4-9.
4
Configuring each function (Administrator)
% Configure the required settings for each advanced function. For details, refer to page 4-10.
d
Reference
For details on the procedure, refer to the User's Guide DVD.
4-4
Using advanced functions
d-COLOR MF283/MF223
4.1
Advertisement
Table of Contents
