Kohler ECV940 Service Manual page 144

Disassembly/Inspection and Service
Remove Fuel Pump Module/Fuel Pump Assembly
Explosive Fuel can cause fi res and severe
burns.
Do not fi ll fuel tank while engine is hot or
running.
Gasoline is extremely fl ammable and its vapors can
explode if ignited. Store gasoline only in approved
containers, in well ventilated, unoccupied buildings,
away from sparks or fl ames. Spilled fuel could ignite if it
comes in contact with hot parts or sparks from ignition.
Never use gasoline as a cleaning agent.
Fuel Pump Module/Fuel Pump was removed as an
assembly. An exploded view of that assembly with steps
to disassemble it follow.
Fuel Pump Module/Pump Assembly Components
I
J
L
D
A Fuel Pump Module
C Inlet Port
E Evap Line
G Inlet Line
I Outlet Line
K Fuel Filter
144
WARNING
H
G
K
F
E
C
B
A
High Pressure Fuel
B
Line Connector
Fuel Pump Module
D
Baffl e
F Electrical Connector
H Fuel Pump
J Pulse Line
L Crankcase Fitting
KohlerEngines.com
1. Remove screws securing fuel pump module to
baffl e.
2. Using a side cutter or similar tool, cut Oetiker clamp
to remove fuel line from fuel pump module inlet port.
3. Disconnect inlet, outlet, and pulse (vacuum) lines at
fuel pump.
62 690 05 Rev. H