Kohler ECV940 Service Manual page 13

TORQUE SPECIFICATIONS
Oil Pan
Fastener
Engine (Oil) Temperature Sensor
Engine (Oil) Temperature Sensor Reducer Bushing
Engine (Oil) Temperature Sensor Nut
Oil Pickup Screen
Mounting Screw
Oil Pump
Mounting Screw
Oil Sentry
TM
Pressure Switch
Solenoid (starter)
Mounting Hardware
Nut, Positive (+) Brush Lead
Starter Assembly
Thru Bolt
Mounting Screw
Brush Holder Mounting Screw
Stator
Mounting Screw
Throttle Body
Mounting Stud (ETB)
Throttle Control Bracket
Fastener
Valve Cover
Aluminum Valve Cover Fastener
Into New Head
Into Used Head
Plastic Valve Cover Fastener
Values are in Metric units. Values in parentheses are English equivalents.
3
62 690 05 Rev. H
3,5
KohlerEngines.com
ECV940
25.6 N·m (227 in. lb.)
13.6 N·m (120 in. lb.)
17.6 N·m (156 in. lb.)
2.3 N·m (20 in. lb.)
11.3 N·m (100 in. lb.) into a new hole
7.7 N·m (68 in. lb.) into a used hole
9.9 N·m (88 in. lb.)
10.7 N·m (95 in. lb.)
4.0-6.0 N·m (35-53 in. lb.)
8.0-11.0 N·m (71-97 in. lb.)
5.6-9.0 N·m (49-79 in. lb.)
16 N·m (142 in. lb.)
2.5-3.3 N·m (22-29 in. lb.)
9.3 N·m (82 in. lb.)
3.7 N·m (32 in. lb.)
9.9 N·m (88 in. lb.)
Torque to 26 N·m (230 in. lb.) to ensure seal
seats in valve cover groove. Back off screw
to zero and then torque screw again to
18.1 N·m (160 in. lb.).
Torque to 16.4 N·m (145 in. lb.) to ensure seal
seats in valve cover groove. Back off screw
to zero and then torque screw again to
16.4 N·m (145 in. lb.).
13.6 N·m (120 in. lb.)
Specifi cations
ECV980
13