Pre-Set Grilling Programmes - SEVERIN Wurster Instructions For Use Manual

6 Pre-set grilling programmes

2 pre-set programmes are available:
• ‚thick sausage' programme („ ") 05:00 min + pre-heating if
required*
• ‚thin sausage' programme („ ") 04:30 min + pre-heating if required*
*Pre-heating time depends on the temperature inside the unit
In addition to the standard time required, the programmes „thick sausage"
and „thin sausage" differ primarily in terms of heating power. While the
„thin sausage" is grilled at full heating capacity, the temperature at which
the „thick sausage" is grilled is slightly reduced in order to ensure that the
sausage is heated correctly all the way through.
GB
HINT:
The ‚thick sausage' programme („ ") is best suited
for sausages with a 30 mm diameter, the ‚thin sau-
sage' programme („ ") for those with a diameter of
around 20 mm.
HINT:
If you are unsure which programme to use, we
recommend that you use the ‚thick sausage'
programme. However, in this case ensure that the
sausages do not turn too dark, and interrupt the
grilling cycle with the „ " button where necessary.
32
HINT:
The settings for both pre-set programmes are
based on sausages at room temperature. If
you have taken the sausages from the refrigerator,
we recommend they are left to stand for around 30
minutes at room temperature.
1. Ensure that the fat tray is empty and that the sausage holder and fat
tray are properly fitted.
2. Ensure that the plug is inserted into a suitable safety socket.
3. Insert 2 sausages of the same kind into the slots, one sausage per slot.
4. If you want to keep the sausages warm for 30 minutes after grilling,
simply press the „ " button before, during or within 60 seconds after the
grilling cycle.
 The „ " button lights up. The sausages will be kept warm for up to
30 minutes after grilling; see also 8 ‚Keeping the sausages warm'
on page 34
5. Use the „ " or „ " button to select a programme suitable for the size of
the sausages.
 The selected button lights up.
6. Push the slide control all the way down until it locks into place.
HINT:
Press down the slide control and hold for 0.5 seconds
until it clicks into place and the countdown or the
animated image „pre-heating phase" starts.
 The appliance starts pre-heating (unless it is still hot from a previ-
ous grilling cycle).