Unfused Image - Xerox Phaser 6125 Service Manual

Unfused Image

Phaser 6125/6130 Color Laser Printer Service Manual
The toner image is not completely fused to the paper. The image easily rubs
off.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes
Fuser (PL6.1.1)
MCU Board (PL8.2.13)
Warning
To prevent burns, allow the Fuser to cool down before starting the
procedure.
Troubleshooting Procedure Table
Step Actions and Questions
Check the paper being used and its
1
condition.
Is the paper dry and recommended
paper?
Is the image printed correctly?
2
Print-Quality Troubleshooting
Example Print
ABCDE abcde 12345
Yes No
Go to step 3. Replace with
dry, approved
paper, then go to
step 2.
Complete Go to step 3.
s6180-330
5-57