Print-Quality Troubleshooting
5-58
Troubleshooting Procedure Table (continued)
Step
Actions and Questions
Check the Toner Type
3
Is non-Xerox Toner in use?
Is the image printed correctly?
4
5
Reseat the Fuser.
Warning:
Start the operation after the
Fuser has cooled down.
Is the image printed correctly?
Replace the Fuser (page 8-9).
6
Warning:
Start the operation after the
Fuser has cooled down.
Does the error still occur when
printing?
Yes
Replace the
toner with the
Xerox toner,
then go to step
4.
Complete
Complete
Replace the
MCU Board
(page 8-59).
Phaser 6125/6130 Color Laser Printer Service Manual
No
Go to step 5.
Go to step 5.
Go to step 6.
Complete