Setting Tone Length Or Start-Up/Power-Off Tone; Changing The Backlight Time Length - Sanyo SCP-6200 Owner's Manual

Setting Tone Length or Start-up/Power-off Tone

You can determine the length of your key beep (you hear this when you
press any key) or type of the Start-up/Power off tone (sounds when you
turn the phone on/off) on this feature.
From the Standby mode, press
1.
Highlight
2. Settings
Highlight
3. Sounds
Highlight
4. Others
Highlight
5. Tone Length
press .
Highlight your desired option and press
6.
Downloads: the downloaded data from web site (see pages 111-112).
Multimedia: the downloaded data from PC (see page 109).
Tip: The volume of Start-up Tone and Power-off Tone can be set. See page
80 for instructions.

Changing the Backlight Time Length

The backlight setting lets you select how long the display screen and
keypad are backlit after any key press is made.
To change the backlight setting:
From the Standby mode, press
1.
Highlight
2. Settings
Highlight
3. Display
Highlight
4. Backlight
Select
5. Always On
press .
always turns the Backlight to off.
Always Off
always turns the Backlight to on.
Always On
Note: Long backlight settings and Always On setting affect the battery
duration of talk and standby mode.
Note: Always On setting returns to previous value on next power cycle.
Section 10
84 Changing Your Phone's Settings
to display the main menu.
, and press .
, and press .
, and press .
, or
Start-up Tone Power-off Tone
to display the main menu.
, and press .
, and press .
, and press .
, or your desired time length, and
Always Off
and
.