Sanyo SCP-6200 Owner's Manual page 134

Selecting Announcement for Screen Call
From the Standby mode, press
1.
Highlight
2. Screen Call
Highlight
3. Announcement
Depending on your preference of setting "already stored" or "user
4.
setting" announcement, highlight
Press .
5.
Recording your Name
You can add your name to the pre-recorded announcement.
Follow these steps:
From the Standby mode, press
1.
press .
Highlight
2. Announcement
Highlight
3. Pre-recorded
Highlight
4. Record Name
When your name has already been recorded, select
overwriting.
Press to start 1st recording.
5.
After the 1st recording, press
6.
To stop recording, wait for 12 seconds or press
7.
(It's available for both 1st and 2nd recording.)
Select
Erase Name
recorded name.
Select at step 4 above to play the pre-recorded announcement.
Play
Section 13
126 Using the Voice Services of Your Sprint PCS Phone
to display the main menu.
and press .
, and press .
Pre-Recorded
, highlight
, and press .
, and press .
, and press .
again to start the 2nd recording.
at step 4 above, and then select
or .
Custom
and
Screen Call
or for
Yes No
.
to erase the
Yes