Selecting A Ringer/Graphics Type For An Entry - Sanyo SCP-6200 Owner's Manual

Selecting a Ringer/Graphics Type for an Entry

You can assign a ringer/graphics type to an Internal Phone Book entry so
you can identify the caller by the ringer or graphics type.
To select a ringer or graphics type for an entry:
Press of the Navigation key.
1.
Select the entry you want to set the incoming ringer or graphics, and
2.
press .
Highlight or
3. Ringer Graphics
Press .
4.
Highlight your desired one, and press
5.
the downloaded data from web site. (see pages 110-111)
Downloads:
the downloaded data from PC. (see page 109)
Multimedia:
equivalents to With Caller ID or Roaming setting.
Normal: Ringer
(see page 81)
Graphics
page 86)
the setting equivalents to off.
None:
Press (left softkey).
6. Save
You should have downloaded data to set incoming graphics.
by scrolling up or down.
.
equivalents to Incoming Calls setting. (see
Using Your Internal Phone Book
Section 9
73