Changing Ringer Volume; End-Of-Call Options - Sanyo SCP-6200 Owner's Manual

Changing Ringer Volume

To change the ringer volume, adjust
when the phone is in Standby mode.
Note: To change the ringer volume from the main menu, see "Adjusting
the Ringer/Key Volume" on page 80.

End-of-Call Options

After receiving a call from or making a call to a phone number that is
not in your Internal Phone Book, the phone number, the duration of the
call are displayed. You can display the following menu options by
pressing in 10 seconds after disconnecting the call.
To select an option, highlight it and press
to dial the phone number.
Call Again
to save the phone number in your Internal Phone
Save Phone#
Book. (See "Saving a Phone Number" on page 32.)
After receiving a call from or making a call to a phone number that is in
your Internal Phone Book, the Phone Book entry name and phone
number, the duration of the call are displayed. You can display the
following menu options by pressing
disconnecting the call.
To select an option, highlight it and press
to dial the phone number.
Call Again
to save the other phone number into the same entry in
Alternate
your Internal Phone Book.
Note: The End-of-Call options are not displayed for calls identified as
No ID or Restricted.
or of the Navigation key
.
in 10 seconds after
.
Section 4
Making and Answering Calls 31