Selecting Ringer Types For Messaging; Setting Tone Length, Start-Up/Power-Off Tone Or Voice Prompt; Adjusting The Phone's Ringer Volume - Sanyo SCP-3200 Operating Manual

Selecting Ringer Types for Messaging

To select a ringer type for text messages:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Ringer Type and press MENU/OK.
5. Select Messaging and press MENU/OK.
6. Select your desired ringer type and press MENU/OK.

Setting Tone Length, Start-up/Power-off Tone or Voice Prompt

You can determine the length of your key beep (you hear this when you press any key) or type
of the Start-up/Power off tone (sounds when you turn the phone on/off on this feature).
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Others and press MENU/OK.
5. Select the menu under Tone Length, Start-up Tone, Power-off Tone, Voice Prompt or
Key Press Echo. and press MENU/OK.
6. Select your desired option and press MENU/OK.
Tip: When ringer volume is set to Silence All, voice prompts cannot be heard.

Adjusting the Phone's Ringer Volume

To change the ringer volume:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Volume and press MENU/OK.
5. Select Ringer and press MENU/OK.
6. Using your navigation key, select your desired volume level and press MENU/OK.
To Adjust Earpiece or Speaker volume:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Sounds and press MENU/OK.
4. Select Sounds and press MENU/OK
5. Select either Receiver and press MENU/OK.
6. Select Earpiece or Speaker and press MENU/OK.
7. Using your navigation key, select your desired volume level and press MENU/OK.
Tip: You can adjust the ringer volume in standby mode by using the Side volume key, and
adjust earpiece volume during a call by using the navigation key up or down or Side volume
key.
21