Sanyo SCP-6200 Owner's Manual page 135

Recording Custom Announcement
Follow the previous steps 1 and 2.
1.
Highlight , and press
2. Custom
Highlight , and press
3. Record
When the announcement has already been recorded, select
for overwriting.
No
Press to start 1st recording.
4.
After the 1st recording, press
5.
To stop recording, wait for 12 seconds or press
6.
(It's available for both 1st and 2nd recording.)
Select at step 3 above, and then select
Erase
recorded announcement.
Select at step 3 above to play the customed announcement.
Play
Tip: You should record the announcement twice because the phone needs
to adjust to the base station programs.
Using the Voice Services of Your Sprint PCS Phone
.
.
or
Yes
again to start the 2nd recording.
.
to erase the
Yes
Section 13
127