Sanyo SCP-6200 Owner's Manual page 109

Setting the Time/Date
In no service area or Analog service area, it's necessary to set actual time
and date to use Calendar function. Set the current Time/Date by using
numeric keys and/or the Navigation key (
change value). To display the time setting display, press
highlight and press
Calendar
It's available from 12:00 AM, Jan 1, 2000 to 11:59 PM, Dec 31, 2099.
Setting Holidays
You can set your personal holidays by displaying the date in bold on the
Calendar display. The default holidays displayed in bold are Sundays and
National holidays.
You can set holidays from Jan 1,2000 to Dec 31,2020.
From the Standby mode, press
1.
Highlight , and press
2. Calendar
Highlight the day you want to set to the holiday by using the
3.
Navigation key ( : previous day,
: next week).
Press .
4.
Highlight or
5. Set Date
.
Options:
sets the selected day to the holiday.
Set Date
sets the weekly holidays.
Set Weekly
resets the holiday setting for the selected day.
Reset Date
resets the weekly holiday setting.
Reset Weekly
resets all the holiday settings and returns to the default
Reset All
settings.
If you selected
6. Set Weekly
prompted to select
Yes
Note: The current day is framed by a rectangle.
: move cursor,
/
.
to display the main menu.
.
: next day,
from the options, and press
Set Weekly
, or
Reset Weekly Reset All
or .
No
Personal Information Management
:
/
, then
: previous week,
, you'll be
Section 12
101