Using The Rotisserie - Capital PROFESSIONAL Series Use And Care Manual

USING THE ROTISSERIE: Lighting the rotisserie burner:
NOTE: The safety valve on all Professional Series rotisserie sections is included in the main burner valve.
No separate safety button is necessary to operate the rotisserie safety feature.
NEVER USE ROTISSERIE BURNER WHEN GRILLING SURFACE IS USED.
The location of the rotisserie burner makes it more susceptible to strong wind conditions than the protected
grill burners. For this reason you should avoid operating the rotisserie during windy conditions.
As an added safety feature we've equipped the burner with an automatic safety valve that will not allow gas to
flow to the rotisserie burner unless the following conditions are present with the knob on.
•
Ignition button is pressed
•
The safety valve button is pressed and held down.
•
The safety valve thermocouple has been sufficiently heated to keep safety valve open.

USING THE ROTISSERIE

Manual Lighting:
To manually light the rotisserie, place a lighter flame near
the tip of the thermocouple as shown in Fig. 13 Turn the
control knob to HIGH.
Hold the safety valve knob in for 10 seconds or until the
burner remains lit. Once lit, turn control knob to desired
setting. If the burner does not light within 4 to 5 seconds,
release the safety valve knob and turn the control knob to
OFF and wait 5 minutes before
trying again.
22