Burner Adjustment - Capital PROFESSIONAL Series Use And Care Manual

BURNER ADJUSTMENTS (continued)
To Adjust:
(Tools Required: Pliers, Flat Head Screwdriver)
1. Light the burner.
2. Turn the control knob to the lowest setting (all the way counter clockwise).
3. Remove the knob.
4. While holding the valve shaft with the pliers, insert a thin flat-Head screwdriver into the shaft and while
viewing the burner adjust to a minimum stable flame. (Fig 10)
WARNING: IMPORTANT!
Before lighting, inspect the gas
supply piping or hose prior to turning
the gas "ON". If there is evidence
of damage or excessive wear,
it must be replaced prior to use.
Fig. 10
GRIDDLE PLATE
The griddle plate can be placed over any burner.
Position the plate so that the raised section is toward the rear of the barbecue. Ensure the plate rests on the
edge of the frame.
Fig. 10
18