Table of Contents
Advertisement
Installation and Operation Guide SOLECTRIA
When opening the inverter cover, both cover supports must be fully engaged to secure the
cover in the upward position. An unsecured cover could fall down and injure nearby
personnel.
When replacing the cover, all 5 latches must be secured to maintain the enclosure rating.
This prevents water from entering the enclosure that could potentially damage the
equipment. Damage due to water is not covered under warranty.
With the cover removed, the inverter is ready for wiring, as shown in Figure 3-8.
DC Negative Connections
DC Positive Connections
AC Phase Connections
DOCR-071074 (Rev 7, 30 MAY 2023)
®
XGI 1500-250 Series Inverters
Figure 3-8 Wiring Box Power Connections
17 of 72
Advertisement
Table of Contents
