Your First Contact - Icom IC-V82 Instruction Manual

QUICK REFERENCE GUIDE
■ Your first contact
Now that you have your IC-V82 ready, you are exited to get
on the air. We would like to walk you through a few basic op-
erational steps to make your first "On The Air" use an enjoy-
able experience.
D About default setting
The [VOL] control function can be traded with [Y Y ]/[Z Z ] keys func-
tion in
INITIAL SET MODE
the factory default setting ([VOL] controls audio output level) is
used for simple instructions.
D Basic operation
1. Turning ON the transceiver
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
➥ While
pushing
], push [PWR] for 1 sec. to
[D•
CLR
reset the CPU and turn power ON.
III
. However, in this QUICK REFERENCE,
[MONI] and
2. Adjusting sudio output level
➥ Rotate [VOL] to set the desired
audio level.
3. Adjusting the squelch level
➥ While
pushing
[MONI], push [Y Y ] or [Z Z ] to set the
squelch level.
4. Tune the desired frequency
The up/down keys, [Y Y ]/[Z Z ], will
allow you to tune the frequency that
you want to operate on. Page 14 will
instruct you on how to adjust the tun-
ing step.
➥ Push [Y Y ] or [Z Z ] to adjust the fre-
quency.
MONI
PWR
D
CLR
and holding
[VOL]
MONI