Icom IC-V82 Instruction Manual page 9

D About AD-99N
Attach the spacer (Spacer B/C) to the adapter (Spacer A) with
orientation as illustrated in the diagram below.
• Attach the spacer (Spacer B/C) to the adapter with the orientation of
the stamp " " pointing up.
When removing the spacer (Spacer B/C), push the notch care-
fully with your finger to remove the spacer (Spacer B/C) from
the adapter (Spacer A).
Remove the spacer (Spacer B/C)
from the adapter.
Push the notch
carefully.
R CAUTION!
DO NOT push or force the notch with a screw driver, etc., to
remove it.
DO NOT bend the notch when the adapter and spacer are not
joined together. This will cause weakening of the notch plastic.
Both cases may break the notch and it may not be able to be
reattached.
QUICK REFERENCE GUIDE
D Antenna
Attach the antenna to the transceiver
as illustrated at right.
D Belt clip
Attach the belt clip to the transceiver as illustrated below.
To attach the belt clip
II