Samsung MWR-WE11N Installation Manual page 22

Wired Remote Controller Installation/Service Mode AA
The example of Wired Remote Controller option setting method
22
1. Press Delete and Set buttons at the same time for more than 3 seconds.
(Main menu) will be displayed and then press the [∧]/[∨] button to select no.1.

2. Press [＞] button to select the number you will set.
Press [∧]/[∨] button and select no.1

3. Press [＞] button to enter the data setting stage.
When you enter the setting stage, the current setting value will be displayed.

Example of data setting stage display
Data bit
1 2 3 4
4. Press [＜]/[＞] button to select the desired Data1.
Press [<]/[>] button to select no.1.

The wired remote controller option is set from both cooling and heating

to cooling only.
5. Press Set button to complete the option setting.
Save the setting value and exit to sub menu.

6. Press ESC button to exit to normal mode.
Data1: Both cooling and heating of an indoor unit
Data2: Use wireless remote controller
Data3: Master wired remote controller
Data4: Temperature display – Celsius (°C)