Page 2
INDEX 1. Controllers Pages 4-21 2. CAC Split Range Pages 22-39 3. RAC Split Range Pages 40-42 4. VRF Range Pages 43-77 5. Miscellaneous Pages 78-82 For any enquiries or technical support please contact us on: Ph. 01 2864377 E. info@gtphelan.ie...
Page 3
CONTROLLERS • MWR-WE13N Pages 4-11 ………………………………………………………………………………………………………………… MWR-WGOOJN • Pages 5-21 ………………………………………………………………………………………………………………. These are the most common type of controller in use. For details on other controllers, please contact GT Phelan.
Page 4
MWR-WE13N Initializing Your Wired Remote Controller Communication Wired remote controller must be initialized if installation status changes. • Changing number of ventilator (ERV)/indoor unit or their address Press the Delete and ESC buttons at the same time for more than five seconds.
Wired Remote Controller Installation/Service Mode Additional Functions of Your Wired Remote Controller If you want to use the various additional functions for your Wired Remote Controller, press the Delete and Set buttons at the same time for more than three seconds. You will enter the additional function settings, and the [main menu] will be displayed.
Page 8
User Setting Options How to Set the Additional User Functions 1 If you want to set the detailed settings, press the User Set button. You will enter the User Set mode, and the [Main Menu] is displayed. 2 Refer to the wired remote controller's User Set list on the next page to select the desired menu. Using the [ UP ]/[ DOWN ] buttons, select a main menu number and press the [>] button to enter the submenu setting screen.
Page 11
MWR-WG00JN Tracking Your Indoor Unit from the Wired Remote Controller Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation. If you want to perform tracking again after installation, then press the and buttons at the same time for more than 5 seconds.
Page 20
User Option Codes (Cont.) Current Time Setting (Example) SETTING 1 Press the button. UP,DOWN LEFT,RIGHT 2 Press the button to select Option, and then press the OK button. UP,DOWN LEFT,RIGHT 3 Press the button to select User mode, and then press the button.
Page 22
CAC Split Range Cassettes • Pages 23-27 ………………………………………………………………………………………………………………… Installation Settings Option Codes Ducted Units • Pages 28-34 …………………………………………………………………………………………………………… Installation Settings Fan Speed Correction Settings Option Codes Outdoor Units • Pages 35-37 ……………………………………………………………………………………………………………… K Button Display Test Mode Twin Split Installation Settings Fault Codes •...
Page 23
Cassette Installation Settings If you want to use the various additional functions for your wired remote controller, press the Set and Esc Buttons at the same time for more than 3 seconds.