Removing The Power Button With Fingerprint Reader; Prerequisites; Procedure - Dell P76F Service Manual

Removing the power button with fingerprint
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.

Prerequisites

1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
4 Remove the heat sink.
5 Remove the display assembly.
6 Remove the I/O board.

Procedure

1 Open the latch, and disconnect the fingerprint-reader cable from the power-button board.
2 Peel the tape that secures the power-button board to the palm-rest assembly.
3 Remove the two screws (M3x3) that secure the power-button board to the palm-rest assembly.
4 Lift the power-button board off the palm-rest assembly.
50

Removing the power button with fingerprint reader

computer. After working inside your computer, follow the instructions in
32
reader
After working inside
www.dell.com/