Removing The Touchpad; Prerequisites; Procedure - Dell P76F Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the battery.

Procedure

1 Remove the three screws (M2x3) that secure the touch-pad bracket to the palm-rest assembly.
2 Lift the touch-pad bracket off the palm-rest assembly.
3 Open the latch, and disconnect the touch-pad cable from touch-pad assembly.
4 Peel off the tapes that secure the touch-pad assembly to the palm-rest assembly.
5 Remove the four screws (M2x2) that secure the touchpad to the palm-rest assembly.
6 Lift the touchpad off the palm-rest assembly.
58

Removing the touchpad

computer. After working inside your computer, follow the instructions in
Removing the touchpad
www.dell.com/
36
After working inside