Table of Contents
Advertisement
Next steps
1. Install the fan.
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure in
Power button with fingerprint reader (optional)
Removing the power button with fingerprint reader
(optional)
Prerequisites
NOTE:
This procedure is only applicable to computers shipped with a power button with fingerprint reader.
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the fan.
5. Remove the
I/O
board.
About this task
The following image indicates the location of the power button with fingerprint reader and provides a visual representation of the removal
procedure.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
55
Advertisement
Table of Contents
