Replacing The Touchpad; Procedure; Post-Requisites - Dell P76F Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the screw holes on the touch pad with the screw holes on the palm-rest assembly.
2 Replace the four screws (M2x2) that secure the touch pad to the palm-rest assembly.
3 Adhere the tapes that secure the touch-pad assembly to the palm-rest assembly.
4 Slide the touch-pad cable into the connector on the touch-pad assembly and close the latches to secure the cable.
5 Align the screw holes touch-pad bracket with the screw holes on the palm-rest assembly.
6 Replace the three screws (M2x3) that secure the touch-pad bracket to the palm-rest assembly.

Post-requisites

1 Replace the battery.
2 Replace the base cover.
computer. After working inside your computer, follow the instructions in

Replacing the touchpad

www.dell.com/
37
After working inside
Replacing the touchpad 59