WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the battery on the palm-rest assembly.
2
Replace the four screws (M2x3) that secure the battery to the palm-rest assembly.
3
Connect the battery cable to the system board.
Post-requisites
Replace the
base
cover.
20
Replacing the battery
computer. After working inside your computer, follow the instructions in
Replacing the battery
www.dell.com/
9
After working inside