WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1
Lift the Mylar to access the memory module.
2
Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops
up.
3
Slide and remove the memory module from the memory-module slot.
Removing the memory modules
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the memory modules
10
21