Removing The I/O Board; Prerequisites; Procedure - Dell P76F Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
4 Remove the heat sink.
5 Remove the display assembly.

Procedure

1 Open the latch and disconnect the fingerprint-reader cable from the I/O board.
2 Using the pull tab, disconnect the I/O-board cable from the I/O board.
3 Remove the screw (M2x3) that secures the I/O board to the palm-rest assembly.
4 Lift the I/O board off the palm-rest assembly.
48

Removing the I/O board

computer. After working inside your computer, follow the instructions in
Removing the I/O board
30
After working inside
www.dell.com/