Lexmark MX810dfe User Manual page 305

Table of Contents

Advertisement

Troubleshooting
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
Replace jammed originals if restarting job.
Try one or more of the following:
Touch Cancel job to clear the message and cancel the scan job.
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job.
Touch Finish job without further scanning to end the last successful scan job.
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace last scanned page and jammed originals if restarting job.
Try one or more of the following:
Touch Cancel job to clear the message and cancel the scan job.
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job.
Touch Finish job without further scanning to end the last successful scan job.
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace maintenance kit, recommended life exceeded [80.xy]
The printer is scheduled for maintenance. For more information, go to
contact your service representative.
Replace maintenance kit to resume printing [80.xy]
The printer is scheduled for maintenance. For more information, go to
contact your service representative.
Replace missing cartridge [31.xy]
Install the missing cartridge to clear the message. For more information, see
on page
254.
Replace missing fuser [80.xx]
1
Install the missing fuser. For more information, see the instruction sheet that came with the replacement
part.
2
From the control panel, touch Supply replaced to clear the message.
http://support.lexmark.com
http://support.lexmark.com
"Replacing the toner cartridge"
305
or
or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx810 seriesMx810Mx811Mx812

Table of Contents