Lexmark MX810dfe User Manual page 211

Understanding the printer menus
Use
Color Balance
Cyan - Red
Magenta - Green
Yellow - Blue
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
ADF Multi‑feed Sensor
On
Off
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Use cc:/bcc:
Off
On
To
Enable an equal balance of colors in the output.
Specify which color to drop and to adjust the dropout setting for each color
threshold.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast of the output.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the
default while warm values generate a redder output than the default.
Enable the use of the cc: and bcc: fields.
Note: Off is the factory default setting.
211