Table of Contents
Advertisement
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
•
To use a Windows
your network in advance. For more information, see the instructions supplied with your wireless LAN
access point/router.
•
If you use Windows
after the wireless configuration by following the on-screen instructions. To install the full driver and
software package, use the Fuji Xerox installation disc.
9. Select your machine and click Next.
10. Type the PIN displayed on the machine's LCD, and then click Next.
®
11. (Windows
7) Select your network, and then click Next.
12. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Fuji Xerox installation disc into your computer or go to the download page for
your model on the Fuji Xerox website at http://www.fujixeroxprinters.com/.
Related Information
•
Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network
•
Wireless LAN Report Error Codes
®
®
7, Windows
8, or Windows
®
®
7, Windows
8, or Windows
®
10 computer as a Registrar, you must register it to
®
10 as a Registrar, you can install the printer driver
69
Advertisement
Table of Contents
