Table of Contents
Advertisement
1
On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Print Reports]
Level 1
Print Settings
Network Config
(For network models)
Print File List
(Available only for certain models)
Drum Dot Print
WLAN Report
(For wireless models)
[Machine Info.]
Level 1
Level 2
Serial No.
-
Firmware Version -
Page Counter
-
1
Toner Life Display the remaining life of the toner cartridge.
Parts Life
Drum Life
1
Life is approximate and may vary by type of use.
[Initial Setup]
Level 1
Level 2
Reset
Machine Reset Restore all the machine settings that you have changed.
Network Reset Restore all network settings back to the factory settings.
Factory Reset Restores all the machine's settings to the factory defaults. Perform this
Local Language -
Related Information
•
Menu Table (for LCD Models)
Level 2 Description
-
Print the Printer Settings page.
-
Print the Network Configuration Report.
-
Print a list of data saved in the memory.
-
Print the Drum Dot Check Sheet.
-
Print the wireless LAN connectivity diagnosis result.
Description
Display the machine's serial number.
Check your machine's firmware version.
Display the total printed pages.
Display the remaining life of the drum unit.
Description
operation when you dispose of your machine.
Select the LCD language for your country.
240
Advertisement
Table of Contents
