Installing The Lower Triple Clamp - KTM 150 EXC TPI 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.10
66
S03514-10
E00921-10
E00922-10

Installing the lower triple clamp

V00359-10
Main work
–
1
Remove screws and hang the combination instrument
holder to the side.
–
2
Remove screw .
–
3
Loosen screw . Take off the upper triple clamp with the
handlebar and hang them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring . Remove protective ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Mount protective ring
5
.
p. 161)
1
is correctly posi-
3
and O-ring .