Charging The 12-V Battery - KTM 150 EXC TPI 2021 Owner's Manual

Table of Contents

Advertisement

15 ELECTRICAL SYSTEM
15.3
112
S03489-11

Charging the 12-V battery

Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
Do not dispose of 12 V batteries as household waste.
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard Hazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Even if there is no load on the 12-V battery, it discharges each day.
The charging level and the method of charging are very important for the service life of the 12-V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the 12-V battery is depleted by repeated starting, the 12-V battery must be charged immediately.
bk
Connect positive cable
Guideline
Screw, battery termi-
nal
Info
A
Contact disk
must be mounted under screw
bm
cable lug
with the claws toward the battery termi-
nal.
Slide positive terminal cover
bo
Connect negative cable
Guideline
Screw, battery termi-
nal
Finishing work
Mount the seat. (
p. 72)
Preparatory work
Remove the seat. (
p. 72)
Remove the 12-V battery.
to the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
bn
over the positive terminal.
to the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
(
p. 109)
bl
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

150 xc-w tpi 2021F7103u6F7175u3

Table of Contents