17 TUNING THE ENGINE
17.1
17.2
128
Checking the throttle cable play
400192-11
Adjusting the throttle cable play
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
E01227-10
–
Check the throttle grip for smooth operation.
–
Turn handlebar as far as possible to the right. Turn the throttle
grip back and forth slightly and determine the play in throttle
A
cable
.
Throttle cable play
»
If the throttle cable play does not meet specifications:
–
Adjust the throttle cable play.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the throttle cable play.
Preparatory work
–
Remove the seat. (
p. 72)
–
Remove the fuel tank.
–
Check throttle cable routing. (
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve
.
–
2
Loosen nut
.
–
3
Turn adjusting screw
–
4
Loosen nut
.
–
5
Turn adjusting screw
–
3
Turn adjusting screw
so that there is play in the throttle
cable at the throttle grip.
Guideline
Throttle cable play
–
Unscrew adjusting screw
play in the throttle cable is worsened.
–
5
Turn adjusting screw
3 ... 5 mm (0.12 ... 0.2 in)
(
p. 128)
(
p. 128)
(
p. 77)
p. 86)
in as far as possible.
in as far as possible.
3 ... 5 mm (0.12 ... 0.2 in)
5
until the smooth operation or
approx. two turns further.