Changing The Headlight Bulb - KTM 150 EXC TPI 2021 Owner's Manual

15 ELECTRICAL SYSTEM
15.8
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
118
E00899-11

Changing the headlight bulb

E00358-10
E00359-10
–
Position the headlight mask and secure it with rubber
2
straps .
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Turn protection cap together with the underlying bulb
socket counterclockwise all the way and remove it.
–
2
Pull bulb socket of the position light out of the reflector.
–
3
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1/socket BX43t) (
–
Insert the protection cap with the bulb socket into the reflector
and turn it clockwise all the way.
Info
Ensure that O-ring
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
p. 119)
p. 117)
.
p. 155)
4
is seated properly.
p. 117)
p. 119)