Table of Contents
Advertisement
Figure 47. Installing the bracket to the new slim optical drive
4. Insert the new slim optical drive into the kit until you hear a click. The slim optical drive is secured in
place.
Figure 48. Installing the slim optical drive into the kit
3.5-inch internal storage drive
To install or replace a 3.5-inch internal storage drive in the kit, do the following:
1. Slide the kit out of the chassis. See "Optical drive" on page 67.
2. Press the clip as shown to open the rear cover of the kit.
.
Chapter 7
Hardware removal and installation
77
Advertisement
Table of Contents
