Table of Contents
Advertisement
Figure 38. Removing the metal bracket from the plastic frame of the converter
c. Carefully flex both sides of the metal bracket to remove the storage drive from the bracket.
Figure 39. Removing the storage drive from the metal bracket
5. To install a new 2.5-inch storage drive into the front-access storage enclosure, do the following:
a. Carefully flex both sides of the metal bracket and align the four tabs
corresponding holes in the new storage drive.
Note: Ensure that the connectors of the storage drive face toward the tab of the metal bracket.
Figure 40. Installing the 2.5-inch storage drive into the metal bracket
b. Insert the four posts
shown.
1
on the metal bracket into the corresponding slots in the plastic frame as
1
on the metal bracket with the
.
Chapter 7
Hardware removal and installation
73
Advertisement
Table of Contents
