Lenovo 30BH User Manual page 88

Note: The instructions on how to install or replace a slim optical drive in the kit also applies to the Slim
Optical Drive Adapter.
1. Slide the kit out of the chassis. See "Optical drive" on page 67.
2. If you are replacing an old slim optical drive, do the following:
a. Press the clip through the hole in the top of the kit as shown and push forward the slim optical drive.
Then, slide the slim optical drive out of the kit.
Figure 45. Removing the slim optical drive from the kit
b. Pull the bracket as shown to remove it from the slim optical drive.
Figure 46. Removing the bracket from the slim optical drive
3. Align the three tabs on the bracket with the corresponding holes in the new slim optical and install the
bracket to the new slim optical drive.
76
P320 User Guide