Set up, install, and configure
•
Korean
•
Arabic
–
Mass storage
•
Hard disk
•
Licensed features
–
IPDS
–
Bar Code
•
Internal solutions port
–
RS-232C Serial Interface Card
–
Parallel 1284-B Interface Card
–
TM
MarkNet
N8230 Fiber Ethernet
•
MarkNet N8450 Wireless Print Server
•
Trusted Platform Module
Notes:
•
An intelligent storage drive or a hard disk is required to activate Forms Merge and some IPDS features.
•
Some options are available only in some printer models. For more information, contact your dealer.
Installing optional trays
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Unpack the optional tray, and then remove all packing material.
4
Align the printer with the optional tray, and then lower the printer into place.
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 20 kg (44 lb), then it may
require two or more people to lift it safely.
48