Panasonic P2HD AG-HPX250EJ Operating Instructions Manual page 141

AUDIO SETUP screen (continued)
Item
MIC GAIN1 Sets the level of an external microphone connected to the
AUDIO INPUT1 terminal.
– 40dB, – 50dB, – 60dB
MIC GAIN2 Sets the level of an external microphone connected to the
AUDIO INPUT2 terminal.
– 40dB, – 50dB, – 60dB
1394 AUDIO OUT Selects audio channel output to 1394 OUT in DVCPRO or
DV mode.
CH1/CH2, CH3/CH4
AUDIO OUT Sets the audio signal output from the AUDIO OUT terminal
(pin jack), HDMI OUT terminal, headphone terminal, and
built-in speaker during P2 card playback.
CH1/CH2:
CH1 output = CH1 signals, CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals, CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals, CH2 output = CH2 signals
CH3/CH4:
CH1 output = CH3 signals, CH2 output = CH4 signals
CH3:
CH1 output = CH3 signals, CH2 output = CH3 signals
CH4:
CH1 output = CH4 signals, CH2 output = CH4 signals
___indicates the factory setting.
Setting Notes
• Available only when SYSTEM
MODE is set to 480-59.94i or
576-50i and REC FORMAT is
set to DVCPRO or DV.
141