Table of Contents
Advertisement
2
Warnings
REMOTE:
Flashes when device settings of wireless
remote control are different.
:
P2
Blinks when no P2 card is inserted or the
card is write protected.
FULL:
P2
Blinks when there is no more space left on
the P2 card.
LACK:
P2
Blinks in loop rec mode when there is not
enough space left on the P2 card.
:
Lights when the battery for the internal clock
is depleted.
• "Charging the built-in battery" (Page E-26 of
Vol. 1)
3
Backup unit displays
The following indications show the status of
backup units connected to the DVCPRO/DV
connector.
The following indications are not displayed
when the menu option 1394 CONTROL in the
OTHER FUNCTIONS screen is set to OFF.
1394 : Recording
1394 : Recording standby
1394
: T he backup unit cannot be
controlled.
1394
: No backup unit is connected.
1394 – – : A backup unit is connected but
is not in recording or recording
standby status.
4
Recording format and system frequency
indication
• System mode
1080i
720P
480i
576i
• Recording format
• In 1080i, 720P system mode
AVC-I 100: AVC-Intra 100 format
AVC-I 50: AVC-Intra 50 format
DVCPROHD: DVCPRO HD format
• In 480 (576i) system mode
DVCPRO50 format, DVCPRO format, DV
format
5
AUTO/MANUAL switch indicator
Indicates when the AUTO/MANUAL switch is
set to AUTO.
6
Information display
The following information is displayed
depending on the situation.
• Performance of auto white balance and auto
black balance
• Warning and error indication
• Information on switch and button operations
• "Center information display" (Page 122)
7
System frequency display
60 : Indicates in 59.94 Hz mode
50 : Indicates in 50 Hz mode
8
Letter box recording display
This display appears in the 480i (576i)
recording format when LETTER BOX is
selected in the menu option ASPECT CONV in
the SYSTEM SETUP screen.
9
Y GET brightness display
When the Y GET function is used, the image
level at the center of the image is indicated in a
range between 0 % and 109 %.
10 Recording/playback frame rate display
In native recording, the capture frame rate
and recording and playback frame rates are
displayed.
Example: 6 0:24PN (recording 60P with the
camera-recorder frame rate set to a
variable frame rate of 24PN)
Playback applies a 2:3 pull-down to perform
24P over 60P, indicating that 24/60 speed slow
playback is performed.
In standard recording only the capture frame
rate is indicated.
Example: 2 4PA (recording 24PA using 2:3:3:2
pulldown for over 60i recording)
11 Audio limiter display
This is displayed when the limiter is set to work
on CH1, CH2 or CH3, CH4.
(Continued on the next page)
119
Advertisement
Table of Contents
