Table of Contents
Advertisement
Adjusting the shutter speed (continued)
If all modes and speeds are available, the display
changes in the following order:
■
When SYSTEM MODE is set to 1080-59.94i,
720-59.94P, 480-59.94i
For 60i and 60P recording
S/S
(1/15)
(1/30) 1/60 1/100
1/250
1/500 1/1000 1/2000
For 30P recording
S/S
(1/7.5) (1/15) 1/60 1/100
1/500 1/1000 1/2000
1/250
For 24P recording
S/S
(1/6)
(1/12) 1/60 1/100
1/500 1/1000 1/2000
1/250
• The bracketed ( ) speeds cannot be selected
when VFR is on.
■
When SYSTEM MODE is set to 1080-50i,
720-50P, 576-50i
For 50i and 50P recording
S/S
(1/12.5) (1/25) 1/50 1/60
1/250
1/500 1/1000 1/2000
For 25P recording
S/S
(1/6.25) (1/12.5) 1/50 1/60
1/500 1/1000 1/2000
1/250
• The bracketed ( ) speeds cannot be selected
when VFR is on.
50
Setting SYNCHRO SCAN mode
1
Select SYNCHRO SCAN in the SHUTTER
mode.
• Turn the SHTR/F.RATE dial, the value
displayed after 1/2000 is the current
SYNCHRO SCAN setting value. Select this
1/120
value.
2
Press DIAL SEL button to select SYNCHRO
SCAN function.
1/120
3
Turn the SHTR/F.RATE dial.
• It is possible to set the SYNCHRO SCAN
shatter speed.
• The shatter speed is set higher by pushing
and turning SHTR/F.RATE dial.
1/120
Range of variation in each mode
■
When SYSTEM MODE is set to 1080-59.94i,
720-59.94P, 480-59.94i
• 60P/60i mode:
• 30P/30PN mode:
• 24P/24PA/24PN mode:
1/24.0 to 1/249.8
■
When SYSTEM MODE is set to 1080-50i,
1/120
720-50P, 576-50i
• 50P/50i mode:
• 25P/25PN mode:
■
Setting the menu option SYNC SCAN TYPE
1/120
in the SCENE FILE screen to deg provides a
guide to setting and displaying shutter angle.
(Page 129)
• 3.0 d to 359.5 d
• If SYSTEM MODE setting is changed, shutter
speed may also be changed.
1/60.0 to 1/249.8
1/30.0 to 1/249.8
1/50.0 to 1/250.0
1/25.0 to 1/250.0
Advertisement
Table of Contents
