Table of Contents
Advertisement
1
Introduction
Power Socket
The access point does not have a power switch. It is powered on when connected to
the AC power adapter, and the power adapter is connected to a power source. The
power adapter automatically adjusts to any voltage between 100-240 volts at 50 or
60 Hz. No voltage range settings are required.
Reset Button
The Reset button can be used to restart the access point or restore the factory
default configuration. If you press the button for less than 5 seconds, the access
point will restart. If you press and hold down the button for 5 seconds or more, any
configuration changes you may have made are removed and the access point is
restored to its factory default configuration.
1-4
Advertisement
Table of Contents
