SMC Networks SMCDPCR-AP User Manual page 46

802.11b/g cradle access point

Hide thumbs Also See for SMCDPCR-AP:

Table of Contents

Troubleshooting

If all other recovery measure fail, and the access point is still not functioning

properly, take any of these steps:

• Reset the access point's hardware using the web interface or through a power

reset.

• Reset the access point to its default configuration by pressing the reset button

on the back panel for 5 seconds or more. Connect to the web management

interface using the default IP address 192.168.1.1, then use the default user

name "admin" and password "smcadmin."

A-2

Table of Contents

Dpcr-ap