SMCPWR-INJ P
The SMCPWR-INJ* Power Injector allows the SMC2655W Access Point
to receive power from the connected Ethernet hub or switch and is used
with an Access Point that does not have access to a standard power outlet.
Follow these steps to install the Power Injector:
1. Connect the power adapter cable to the Power Injector.
2. Plug the power cord into a power outlet. The LED on the Power
Injector will light.
3. Connect an Ethernet cable from your Ethernet hub/switch to the
network port on the Power Injector.
4. Connect another Ethernet cable from the Access Point port on the
Power Injector to your Access Point.
*Sold separately
Note: The SMCPWR-INJ is designed for use with the SMC2655W
Access Point only. Using the Power Injector with any other
Ethernet device may damage the device.
EZ C
ONNECT
OWER
I
NJECTOR
™
7