Table of Contents
Advertisement
Wireless VAP 2 Setting – Sets the wireless Service Set Identifier (SSID) and
5.
wireless security encryption key for the VAP 2 wireless network.
Figure 3-7. Setup Wizard - Setting the VAP 2 SSID and Security
Enter the SSID, or wireless network name, which all wireless stations must use
to associate with the access point. The SSID is case sensitive and can consist
of up to 32 alphanumeric characters (Default: SMC AP2).
The access point offers two wireless security options; Wired Equivalent Privacy
(WEP) or Wi-Fi Protected Access Pre-shared Key (WPA / WPA2-PSK). Select
the security you want to use and enter the appropriate encryption key, or select
"none" for no security.
• WEP Key — Enter 10 hexadecimal digits (0 to 9 and A to F) or 5
alphanumeric characters for 64 bit keys, 26 hexadecimal digits or 13
alphanumeric characters for 128 bit keys, and 32 hexadecimal digits or 16
alphanumeric characters for 152 bit keys.
• WPA / WPA2-PSK Key — Enter as an easy-to-remember form of letters and
numbers. The key must be from 8 to 63 characters, which can include
spaces.
Note: All wireless devices must be configured with the same WEP or
WPA2-PSK
Click Finish.
6.
Key values to communicate with the access point.
Using the Setup Wizard
WPA /
3
3-9
Advertisement
Table of Contents
