Connect Cables; Connect Power - SMC Networks WAP5110 Quick Start Manual

3. Connect Cables

Connect network cable to the RJ-45 port for your network connection. The RJ-45
port connection can also provide PoE power to the unit.

4. Connect Power

If you do not power the unit using PoE, connect the AC power adapter to the AP
and to an AC power source.
1
Connect Category 5e or better cable to the RJ-45 port.
1
1
Connect the power adapter to the power socket.
2
Connect the power adapter to a nearby AC power source.
– 3 –
Quick Start Guide
1
2