Replacing The Buckle; Cleaning - Britax GROW WITH YOU CLICKTIGHT User Manual

BRITAX Child Safety, Inc.
3. Pull the seat cover forward
and over the EZ-Buckle
belly pad.
4. Turn and pull the buckle
retainer through the slot
in the child seat shell.
NOTE: Pull the belly pad
over the buckle retainer
to remove.

Replacing the Buckle

IMPORTANT: Choose the slot closest to, but not under
the child.
1. Turn and push the buckle
retainer through the slot in
the child seat shell.
2. Pull the EZ-Buckle
belly pad through the
corresponding slot in the
seat cover.
NOTE: Ensure that
the buckle strap is not
twisted and the red
release button faces out.
3. Place the seat cover back
in its original position
a. Attach the elastic
straps.
b. For select covers
only: Attach the
retaining clips.
NOTE: Pull the belly pad
over the buckle retainer
to remove.
4. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
42
GROW WITH YOU CLICKTIGHT / PLUS User Guide

Cleaning

Shell
• SPONGE CLEAN the
shell using warm water
and mild soap.
• TOWEL DRY
WARNING!
Grow With You ClickTight Plus - Prevent the Side Impact
Cushions from being punctured. Puncture damage will cause the
cushions not to perform as intended.
Cover
• Refer to product
care label for wash
instructions
• If care label indicates
machine washable,
always refer to us.britax.
com/faqs for additional
care information. Before
washing, ensure all the
hook and loop fasteners
are secured.
Harness • SPONGE CLEAN the
harness using warm
water and mild soap.
• TOWEL DRY
Harness • THOROUGHLY RINSE
Buckle
the buckle using warm
water.
• TEST THE BUCKLE
by fastening and
unfastening until a click
is heard after inserting
each buckle tongue.
If clicks are not heard,
repeat the cleaning
procedure.
• TOWEL DRY
DO NOT
• Use abrasive
cleaners.
DO NOT
• Bleach
• Iron
DO NOT
• Disassemble the
harness
• Bleach
• Machine wash
• Machine dry
• Iron
DO NOT
• Soak
• Lubricate
• Use solvents
• Use soap or
household
detergents
43