Britax GROW WITH YOU CLICKTIGHT User Manual page 9

BRITAX Child Safety, Inc.
LUAS with CLICKTIGHT
Before you begin:
• Check that your vehicle has lower anchors.
• Use the vehicle belt (not lower connectors) for harness mode
installations with children who weigh more than 18 kg (40 lbs).
• Check that your vehicle has a top tether anchor.
• The top tether must be used at all times when installing the
child seat. Using the top tether will improve the stability of your
child seat and reduce the risk of injury. Check your vehicle
owner's manual for tether anchor locations.
• Loosen the tether and place it over the child seat back to keep
it from becoming pinned between the child seat and vehicle
seat during installation.
• Adjust the child seat to desired position and place forward
facing on the vehicle seat.
1. Release the buckle and
open the CLICKTIGHT
to access the lower
connectors.
a. Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Route the lower connector
strap along the green belt
path.
3. Firmly attach the lower
connector onto their
adjacent lower anchors.
For push-on lower
connector only: A click
helps confirm attachment.
NOTE: Verify that the strap
is not twisted.
4. Pull the end of the lower
connector strap to remove
slack.
IMPORTANT: Overtightening
the webbing may prevent the
CLICKTIGHT from properly
securing.
12
Lower Connector
Lower Connector Push-on
Hook (Select Models)
GROW WITH YOU CLICKTIGHT / PLUS User Guide
5. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
2.5 cm (1 in.) at the belt
path. If the child seat
is not secure, repeat
the installation or use a
different seating location.
6. Firmly press the tether
hook over a designated
vehicle tether anchor.
Remove slack.
7. Secure excess webbing
with the elastic strap.
LUAS with CLICKTIGHT
Lower Connector Push-on
(Select Models)
NOTE: Do not install by this method for a child weighing
more than 40 lbs (18.1 kg).
9 All connections are secure and strap is not twisted.
9 Child restraint cannot be moved front to back or side
to side more than 1 in. (2.5 cm) at the belt path. If the
child restraint is not secure, repeat the installation or
use a different seating location.
9 Excess top tether webbing is contained within your
vehicle and secured.
Or
Or
Lower Connector Hook
13