Britax GROW WITH YOU CLICKTIGHT User Manual page 18

BRITAX Child Safety, Inc.
7. Lay the EZ-Buckle belly
pad forward and position
on top of the harness
adjuster release lever.
8. Place the seat cover back
in its original position.
a. Attach the elastic
straps.
b. For select covers
only: Attach the
retaining clips.
9. Close the CLICKTIGHT.
A click helps confirm the
CLICKTIGHT is secure.
10. Raise the head restraint to
the highest position.
11. Tuck each harness strap
under the side wing
covers.
a. Disconnect one of the
stay put comfort pads
and place behind the
other comfort pad.
b. Fold the harness straps
to remove any additional
slack before tucking
underneath the bib.
c. Slide the comfort pads,
chest pads, chest clip
and buckle tongues to
the top of the harness
trap before folding.
12. Tuck the harness straps
behind the head restraint
bib.
30
GROW WITH YOU CLICKTIGHT / PLUS User Guide
Booster to Harness Mode: Restoring the Harness and Buckle
1. Open the CLICKTIGHT.
a. Locate the two slots
in the CLICKTIGHT
cover.
b. Squeeze the
CLICKTIGHT release
levers.
2. Unhook the elastic straps
at the back of the seat
cover.
For select covers only:
Unhook the retaining clips
at the back of the seat
cover.
3. Pull the seat cover and
foam insert forward.
4. Pull the EZ-Buckle belly
pad through the slot in the
seat cover.
NOTE: Choose the slot
that is closest to, but not
under your child.
5. Place the seat cover back
in its original position.
a. Attach the elastic
straps.
b. For select covers
only: Attach the
retaining clips.
31